Professional Manufacturer for Fluoropolymer (PVDF) and Fluoroelastomer (FKM)

Home / All / PVDF / PVDF for Lithium Batteries /

Zheflon® FL2800 PVDF- Lithium battery Binders Grade

Zheflon® FL2800 PVDF- Lithium battery Binders Grade

Zheflon® FL2800 PVDF- Lithium battery Binders Grade

FL2800 is a low-medium viscosity grade PVDF copolymer use for Li-battery binder, lithium iron phosphate.
CategoriesPVDF for Lithium Batteries
BrandZheflon PVDF & Flurine FKM Manufacturer
ModelFL2800
FeaturesCopolymer, low to medium viscosity
UsesBattery binder,lithium iron phosphate
FormsWhite powder
Update TimeApr 23,2024
Detail Information

Zheflon® FL2800 is a medium to low viscosity grade polyvinylidene fluoride copolymer. It imparts a certain flexibility to the material while reducing the crystallinity of the polymer. It can enhance the interaction between polymer molecules, active materials and metal pole pieces, improve adhesion performance and improve the solid content of slurry. It is especially suitable for the application of lithium iron phosphate system in electric vehicle industry.

Zheflon® FL2800 can effectively reduce the amount of formula used, reduce the DC internal resistance of the battery, improve the energy density and charge and discharge performance of the battery, and effectively increase the capacity retention rate of the battery during the cycle to meet the needs of the automotive industry.


General

Features

Copolymer,  low to medium viscosity

Uses

Battery binder, lithium iron phosphate

Forms

White powder

Items

Typical Value

Test Method

FL2800

Physical Properties

Density(g/cc)

1.77~1.79

ASTM D792


  

Water Absorption(%)(Time 24 hr)

≤0.10

ISO 62

Dissolution properties

Rotational viscosity(cps)

1,500-8,000

1gPVDF:10gNMP, #3spindle,25℃


Thermal Properties

Melting Point(℃)

158~165

ASTM D3418

Crystallization Temperature(DSC peak)(℃)

125~135

ASTM D3418

Glass Transition Temp, Tg(℃)

-40.0

ASTM E1356

Decomposition Temperature(℃)

≥375

1% wt. loss / in air


  

Heat of Fusion(J/g)

25.0~35.0

ASTM D3418

 


1.PVDF should be processed under 260℃,to avoid producing toxic gases;

2.PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;

3.Operators should take good care of personal protection during the use procedure and processing.


PVDF is packed in PE plastic bag and then be put into a drum with the net weight 25KGS. It must be stored in clean, cool, dry place.

Contact Immediately

We have a dedicated team of technical experts ready to assist you with your most challenging projects. Discover cost-effective customized solutions for exceptional performance and value. Contact us today – we are eager to take on the challenge!
*Email
Name
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Let's Innovate Together

We have a dedicated team of technical experts ready to help you with your most challenging projects, so contact us today - we're ready for the challenge!
Founded 2007, is a tech enterprise specializing in fluorine-based materials. We drive renewable energy and sustainability through innovation.